GSCM-Mini Auto Start Module

The GSCM-mini is a micro-processor based generator startstop module, designed to auto start-stop generators needing a 3 wire connection from a 2 wire manual start command. It automatically disconnects the starter when a minimum generator AC Hz. output is measured, it can monitor the generator's output, shutting it down if either an over or under Hz condition is detected. LEDs are flashed to indicate the cause of the shutdown. Manually resetting the GSCM-mini by removing the power, removes the lockout and allows the generator to restart if called to do so. The GSCM-mini is powered by 12VDC from the generator battery, and can monitor the battery voltage and start the generator to charge it's own battery. All Thresholds are fixed.

Manual

Remote Temperature Sensor

The OutBack Remote Temperature Sensor (RTS) is a necessary tool for proper battery charging. All OutBack products with integrated battery charging have a temperature compensation system built-in which benefits from the installation of the optional RTS. The RTS ensures that your OutBack system knows the precise ambient temperature so that it can recharge your batteries safely and efficiently. Systems with multiple OutBack products connected to one HUB4 or HUB10 require only a single RTS to be installed.

Brochure

HUB4 Communications Manager

The HUB system communications managers are the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load share and power save off/on signals. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks. Through the use of a HUB, your system is completely coordinated and managed by the MATE.

TPS-Mate 2M-OEM

The MATE System display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE you can remotely manage and monitor multiple inverter/chargers, charge controllers, monitoring devices and any future OutBack power conversion and control products.

The TPS-Mate 2M - OEM is packed full of features to make system management simple. The easy-to-read 3.1” (8 cm) LCD is backlit for dark operating conditions. Four soft keys allow easy context-based navigation of menus and functions. Two hot keys give immediate access to AC and inverter functions.

Brochure

Class T Fuse Block

The IPS® Class T Fuse Block is designed to provide code compliant over-current protection for mobile applications. It protects the battery bank, inverter and cables from damage caused by short circuits and overloads. It uses a fast acting, current limiting class T fuse cartridge which provides instantaneous protection in the event of a short circuit but also employs a time delay to allow momentary current surges common in inverter applications.

EPS Energetics LLC, offers a complete line of IPS® class "T" fuse blocks. Available in 110, 200, 300, 350 and 400 amp models. IPS® fuse blocks are ideal in mobile applications where over-current protection is required for high current components such as inverters and chargers. A rugged GE Lexan®940 injection molded base and thermoformed Abex 700 ® ABS cover provide durability, easy installation and good looks all in a compact, cost effective package.

Panel Mount Breakers

Panel mounted hydraulic-magnetic type breakers that can be used for DC sources, inverters, or load circuits.

Brochure